ESU

LokPilot V4.0 M4, multiprotocol MM/DCC/SX/M4, 6-pin plug NEM651, cable harness 64613

  • Sale
  • $50.65


Operational modes: DCC 14, 28, 128 speed steps

  DCC long and short addresses

  DCC traction address (Consist Mode)

  DCC LGB pulse control

  Automatic speed step detection

  Lenz® LG 100, ROCO® brake unit

  Lenz® ABC brake unit

  ZIMO® HLU commands

  DC analogue operation

  Motorola® 14 speed steps

  Motorola® 28 speed steps

  Motorola® address 1 - 80

  Motorola® address 1 - 127

  Motorola® address 1 - 255

  M4 data protocol (mfx® compatible)

  Selectrix®

  Märklin® brake unit

  AC analogue operation

  Automatic detection of operational mode

Throttle: DC and coreless motors, AC motors with magnet

  PWM frequency 40,00 kHz

  Load control in digital operation

  Load control in analogue operation

  Adj. start / maximum speed in analogue operation

  Mass simulation for 14 speed step operation

  Autotune function for load control

  DDC (Dynamic Drive Control)

  Continious motor current 1,1A

  Short circuit protection

Function outputs: Amplified function outputs with short-circuit protection: 6

  Current of each output 250mA

  Logic level outputs 2 (21MTC)

  Output dimming

  Light effects like Blinking lights, Marslight, Fire box flickering etc.

  Time-controlled function outputs

  Function Mapping V4.0 ESU (F0 - F28)

  Function Mapping M4® compatible

  Shunting mode (de-selectable)

  ABV (de-selectable)

  Serial protocol (for SUSI)

Programming:  

DCC service mode programming modes (Register Mode, Address Only, Direct Mode)

  DCC POM (Programming On the Main)

  Programming mode for Märklin® 6021

  M4® configuration on the main track

Specials: M4® feedback system

  RailCom® feedback system

  RailComPlus® automatic recognition

  Storage of current operational state (memory)

  Motorola® wrong-direction bit

  »PowerPack« energy storage optional

Dimensions in mm: 21,4x15,5x5,5