ESU

LokSound micro V4.0 "Universal sound for reprogramming", with 8-pin NEM652 connector 56899

  • Sale
  • $179.85


Modes: NMRA/DCC with 14, 28, 128 drive steps and automatic detection.

  DCC 2-digit & 4-digit addresses.

  Digital Motorola® (old and new), up to 28 drivesteps in Motorola®-mode. Up to 255 addresses in Motorola®-mode. 2nd address for function keys F5 to F8.

  Selectrix® operation with 31 drive steps. Extended functions for up to 8 function keys (suitable control station necessary).

  Analogue DC operation (deactivation possible).

  Automatic recognition of the operating mode and the DCC drive step configuration.

  Supporting Lenz® LG100, Märklin®, Roco® braking modes. Supporting Lenz ABC brakes and Märklin® brake mode

  Reverse bit

  Intelligent programming mode with Märklin® 6021®. Suppoting programming modes for ROCO Lokmaus 2 and ROCO Multimouse.

  Connection to DC-motors with permanent magnet.

  Noiseless, motor saving control with 40 / 20 kHz pwm frequency

  Motor output protected against overload. Load control of the 5th generation (possible to deactovate) Dynamic Drive Control.

Function outputs: 4 amplified outputs

  max. 150mA load for each output

  Total current for all function outputs ca. 280mA. Outputs short circuit protected.

  Free individual function mapping. Function keys F0 to F28

  2 logic outputs. Serial protocol for C-Sinus and light control (Next18 interface).

Sound unit: 8 (!) individual sound channels

  High power amplification with about 1.8 Watts

  Soundfiles in the internal flash memory modifiable

  Modes for Steam-, Dieselhydraulic- , Dieselelectric- , Electric locomotives, battery railcars, hybrid locomotives and so on

  32 MBit sound memory (up to 276 seconds)

Energy buffering: Connecting for ESU PowerPack available

Communication: Full RailComPlus® integration

Loudspeakers: Impedance 4-8 Ohms, 4 Ohms recommended. Special speaker 4 Ohms, 16x25mm diameter (with sound chamber) included in delivery

Dimensions: 25.0mm x 10.6mm x 3.8mm