Modeled after a structure found at Rock Island's Oklahoma city facility in the 1970s. This kit offers the hobbyist a real focal point for their layout. Available with or without interior lighting and realistic welding effect.
This detailed scale model kit is made of injection molded styrene. Parts are molded in 2 colors. Hinged doors at both ends of the structure can be opened and closed, and allow for "Run Through Service". 8 Skylights and 6 windows show off the Welding effect and Interior lighting. The structure fits over most straight track.
A custom built circuit randomly flashes LEDs as if really welding. Including longer and shorter welds and varying time between welds. The circuit is held to the side wall by a clear circuit protector to keep it out of the way. Also included is interior lighting provided by long lasting LEDs that are mounted in special light bars that hold the lights in realistic locations. HO scale has 2 LEDs and N scale has 1.
Wiring the electronics is made easier because both the welding circuit and the LED lighting have built in bridge rectifiers. This means you do not have to worry about positive or negative leads just make sure you have the correct voltage, hook up the wires and you're done. The welding circuit works with 7-20 volts D/C and 6-14 volts A/C (12 volts A/C or D/C is Recommended ) the voltage can be increased to 14-24 volts A/C or 20-24 volts D/C by using the supplied resistor. The LED lighting can be used with 7-19 volts A/C or D/C.
BUILDING SIZE
HO scale, approximately 9" long 3" wide and 3" tall.
Clear instructions are supplied. Only average modeling skills are needed for assembly.
Intended for ages 14 and up.
This detailed scale model kit is made of injection molded styrene. Parts are molded in 2 colors. Hinged doors at both ends of the structure can be opened and closed, and allow for "Run Through Service". 8 Skylights and 6 windows show off the Welding effect and Interior lighting. The structure fits over most straight track.
A custom built circuit randomly flashes LEDs as if really welding. Including longer and shorter welds and varying time between welds. The circuit is held to the side wall by a clear circuit protector to keep it out of the way. Also included is interior lighting provided by long lasting LEDs that are mounted in special light bars that hold the lights in realistic locations. HO scale has 2 LEDs and N scale has 1.
Wiring the electronics is made easier because both the welding circuit and the LED lighting have built in bridge rectifiers. This means you do not have to worry about positive or negative leads just make sure you have the correct voltage, hook up the wires and you're done. The welding circuit works with 7-20 volts D/C and 6-14 volts A/C (12 volts A/C or D/C is Recommended ) the voltage can be increased to 14-24 volts A/C or 20-24 volts D/C by using the supplied resistor. The LED lighting can be used with 7-19 volts A/C or D/C.
BUILDING SIZE
HO scale, approximately 9" long 3" wide and 3" tall.
Clear instructions are supplied. Only average modeling skills are needed for assembly.
Intended for ages 14 and up.