Peco

PL-18

PL-18 Studs & Tags for PL-17 (25)

  • Sale
  • $8.15


STUD AND TAG WASHERS FOR TURNOUT MOTOR OPERATION

A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated.

Recommended to be used with:

  • PL-17 Probe for Operating Turnout Motors
  • PL-10 Turnout Motors